QuikLitbyMIRAKLE
QuikLit / Solderless profiles / QUIKLIT-1707
QUIKLIT-1707 lit
Solderless LED profileNew

QUIKLIT-1707

Solder-free 17 × 7 mm recessed profile with an opal cover for a dot-free line of light.

16 W/mPower
17 × 7 mmGroove
5 yearsWarranty on the light
QUIKLIT-1707 section, groove 17 × 7 mm

Specification

Size17 × 7 mm
Power16 W/m
CCT3000K · 4000K
CRI90
Voltage24V DC
GrooveW 17 · H 7 mm
CoverOpal
LEDDouble-PCB SMD
MountingRecessed
Body colourRoman grey
Warranty5 years on the light. Accessory sets, connectors and wires are not covered.

Order codes

QUIKLIT-1707-3K · QUIKLIT-1707-4KAluminium profile with opal diffuser, double-PCB SMD LED, 24V DC, CRI 90
QUIKLIT-1707-ACC1 wired end cap (1800 mm wire), 1 end cap, 2 back clips · white / transparent
QUIKLIT-1707-CORNER CONNECTORJoins two 1707 profiles at a corner · white / transparent
QUIKLIT-1707-STRAIGHT JOINTERJoins two 1707 profiles in a straight line · white / transparent

Completes the system

Every QuikLit profile runs on 24V DC and connects with plug-and-play wiring and sockets.

Fitting it

Step 1
Step 2
Step 3
Step 4
Cut at the pads between groups so every LED keeps its resistor. Cutting through a chip or a resistor stops that LED. Request datasheet →
For furniture makers Try QUIKLIT-1707 in your factory. Ask for the profiles sample bag (QUIKLITFURSAMBAG). The QuikLit team calls back within 24 hours. QuikLit Desk · +91 92279 96634 · quiklit@hrishalightings.com Request a sample bag